The testosterone injection is one of the most commonly used forms of testosterone replacement therapy. Many men deliberately choose it because it is reliable, effective, and relatively cost-efficient. At the same time, questions often arise: How is testosterone properly injected? How often should you inject? Which is better, subcutaneous or intramuscular? And how do you store the medication correctly?

The following article summarizes the most important basics of testosterone injection and shows you what matters for safe and effective use. The information presented is solely for general medical education and does not constitute an individual treatment recommendation. Decisions regarding testosterone therapy should always be made on the basis of personal medical advice.

If you have questions about your hormone levels, symptoms, or possible treatment options, please contact a qualified doctor. Alternatively, you can schedule a medical consultation here directly.

Banner showing the Adon Health Premium Testosterone Test and inviting you to order.

Why is testosterone injected

In cases of medically confirmed testosterone deficiency, testosterone replacement therapy may be beneficial (Wang & Swerdloff, 2022). The goal is to bring the hormone level into a physiological range and alleviate typical symptoms such as fatigue, loss of libido, loss of strength, or concentration problems (Sizar et al., 2023).

You can find out more about testosterone deficiency in our article “Testosterone Deficiency in Men: Causes, Symptoms, and Solutions”.

The injection of testosterone, often in the form of testosterone enanthate or testosterone undecanoate, enables reliable absorption of the hormone into the body. Compared to gels or patches, the injection offers more stable bioavailability (Al-Zoubi et al., 2021).

 

What testosterone preparations are available

For injection therapy, various so-called testosterone esters exist worldwide. However, not all preparations are approved in Germany. In everyday medical practice, two testosterone preparations are mainly used.

 

Approved testosterone preparations in Germany

Testosterone enanthate

Testosterone enanthate is the most commonly used preparation for injection. It is a medium-acting ester that is usually administered every two weeks or split once a week or every 3.5 days.

This flexible dosing allows for more even testosterone levels. This can help reduce hormonal fluctuations as well as possible side effects. Enanthate is particularly well suited for an individually tailored therapy, as dosages can be changed relatively easily (Pastuszak et al., 2021).


Testosterone undecanoate

Testosterone undecanoate is a long-acting depot preparation. After an initial phase, injections are usually only given every 10 to 14 weeks.

The advantage lies in the infrequent injections and the even long-term effect. However, the dosage is less flexible. If side effects occur or adjustments are necessary, the therapy can only be changed with a delay, as the hormone remains in the body for many weeks.


Testosterone preparations not approved in Germany

Testosterone cypionate

Cypionate is widespread in countries such as the USA, but is not approved in Germany. The duration of action is similar to that of enanthate, but slightly longer.


Testosterone propionate

Propionate is a short-acting ester with very rapid release. Due to the short half-life, injections every one to two days would be required. This preparation is also not approved in Germany and is not used regularly here.

 

Why injections are often preferred

Testosterone injections enable a direct and reliable absorption of the hormone into the bloodstream. This allows the hormone level to be precisely controlled and kept constantly in the desired physiological range (Dobs & Campbell, 2022). Compared to transdermal applications with gels, injections are significantly less dependent on external factors. Sweat, skin condition, incorrect application, or incomplete absorption play no role when injecting testosterone (Pastuszak et al., 2021).

With testosterone gels, there is also the risk of unintentional transfer to other people, for example through skin contact with partners, children, or pets. Although this risk is low with proper use, it should not be underestimated. What is important here is consistent hand hygiene, covering the application site, and observing waiting times before body contact.

Injections completely bypass this risk of transfer, as the testosterone is introduced directly into the body and not released through the skin surface. For many men, this represents an additional safety aspect, especially in the family environment.

 

How is testosterone injected

In principle, there are two common methods for injecting testosterone: intramuscular (i.m.) and subcutaneous (s.c.) application. Both variants differ in terms of technique, tolerability, and legal classification.


Intramuscular (i.m.)

With an intramuscular injection, the testosterone is injected directly into a muscle, usually into the shoulder muscle (enanthate), the gluteal muscle (undecanoate), or also the side of the thigh. This method has been established for decades and corresponds to the approved use of the testosterone preparations available in Germany.

Advantages:

  • fast and reliable absorption into the bloodstream

  • medically well studied and standardized

  • suitable for larger injection volumes

Disadvantages:

  • injection can be more painful

  • higher requirements for technique

  • possible risk of muscle irritation or hardening

Intramuscular injection is the officially approved application form for testosterone enanthate and testosterone undecanoate in Germany. It is therefore usually recommended by doctors. While an injection into the shoulder muscle (enanthate) can also be performed by patients themselves after good training, the injection into the gluteal muscle (undecanoate) should always be performed by a doctor, as important nerves can be damaged here with incorrect application.


Subcutaneous (s.c.)

With a subcutaneous injection, the testosterone is injected into the subcutaneous fat tissue, often in the abdominal area. This method is increasingly used by patients, as it is perceived as less painful and easier to perform.

Advantages:

  • lower perception of pain

  • easier application in everyday life

  • well suited for more frequent, low-dose injections

Disadvantages:

  • limited injection volume

  • slower absorption of the active ingredient

It is important to know that testosterone preparations in Germany are currently exclusively approved for intramuscular use. Subcutaneous injection therefore represents a so-called off-label use.

Nevertheless, current studies show that subcutaneous testosterone injections with the correct dosage show comparable efficacy and good tolerability (Figueiredo et al., 2021). The side effect profile also does not differ significantly from intramuscular application. Many patients also report better everyday usability and less injection pain (Kaminetsky et al., 2015).

However, an off-label use should always be accompanied by a doctor. What is important is correct technique, sterile working methods, and regular monitoring of hormone levels to ensure safety and treatment success. It should be noted that subcutaneous injection is particularly useful for shorter injection intervals such as once a week or every 3.5 days. With longer intervals and correspondingly higher single doses, the injection volume can in many cases be too large for the subcutaneous fat tissue, which can impair tolerability.

 

How often should you inject testosterone (injection intervals)

The frequency of testosterone application has a decisive influence on the stability of the hormone level and the occurrence of possible side effects.

In Germany, the classic standard dosage for testosterone enanthate is 250 mg every 14 days. This dosage is officially approved and corresponds to the product information of the preparations. However, many modern therapy concepts rely on shorter injection intervals with an adjusted dose to achieve more even testosterone levels, e.g., every 7 days or every 3.5 days (Pastuszak et al., 2021). The goal is to always reach 250 mg within two weeks. With injections at 14-day intervals, there is often a sharp increase in the testosterone level shortly after administration, sometimes into the supra-physiological range. In this phase, aromatase activity is increased, which can lead to an increased conversion of testosterone into estrogen and favor corresponding side effects. At the end of the interval, however, the testosterone level often drops significantly, so deficiency symptoms can occur again.

Many experts now recommend a split dosage to avoid strong fluctuations in the hormone level and reduce side effects.


Hygienic aspects with more frequent injections

An important point in Germany is the availability of the preparations. Testosterone enanthate is usually only available here as a 1 ml Brechampule with 250 mg. These ampoules are intended for single use.

Those who use shorter injection intervals face two options:

Either only part of the ampoule is drawn up and the rest is discarded. This is hygienically safe, but leads to medication loss.

Or the remaining contents are kept for a later injection. This can increase the risk of contamination, even with careful handling.

In principle, more frequent injections are associated with a slightly higher hygienic risk. However, with correct technique, sterile working methods, and proper storage, this risk is low. Many patients report good tolerability and stable treatment results. The concrete handling and storage should always be coordinated individually with the treating doctor. However, many doctors report positive experiences when the drawn-up testosterone is stored at room temperature, protected from light, and not in the refrigerator, ideally already in the syringe used and with a freshly changed, unused injection needle before the next application.


Individual decision and medical supervision

Shorter injection intervals can lead to better hormone levels and fewer side effects. However, they are outside the classic standard dosage and should always be accompanied by a doctor.

What is important:

  • clean injection technique

  • sterile materials

  • regular laboratory controls

  • individual adjustment of the dose

Every adjustment is made at your own responsibility in principle and should be medically accompanied.

 

What injection equipment is required

For a safe and hygienic injection, the right injection equipment is crucial. In addition to the appropriate needles, other materials are required to minimize the risk of infection and ensure a clean application.


Basic equipment for the injection

A complete set includes:

  • Single-use syringes, usually 1 ml volume

  • Drawing needle, usually 20 Gauge

  • Injection needle, usually 25 to 27 Gauge

  • Disinfectant for skin and ampoule

  • Alcohol swabs or sterile compresses

  • Disposable gloves

  • Band-aid or sterile swab for after the injection


Drawing up the testosterone

Testosterone solutions are oil-based and relatively viscous. Therefore, a larger needle is used to draw up the medication, usually a 20G drawing needle.

Advantages of the larger needle:

  • faster drawing up of the oil

  • less force required

  • less strain on the syringe

Before drawing up, the neck of the ampoule should be thoroughly disinfected.


Injection needles depending on the application

Intramuscular

For intramuscular injection, longer needles are generally required to ensure they reach the muscle tissue.

Typical specifications:

  • 25G to 27G

  • Usually 16 to 25 mm long

  • suitable for the shoulder muscle (for undecanoate and injections into the gluteal muscle, significantly longer needles may be required in some cases)

These needle lengths are generally sufficient to safely deliver the testosterone into the muscle tissue without injecting unnecessarily deep. This can reduce pain, bruising, and local irritation.

Proper technique is particularly important with oil-based preparations such as testosterone enanthate, as the shoulder muscle has limited capacity and excessively large volumes can cause local discomfort.


Subcutaneous

For subcutaneous injections into the fatty tissue, significantly shorter and finer needles are often sufficient.

Typical specifications:

  • 27G to 30G

  • Approximately 8 to 13 mm long

  • often available as insulin needles

They are particularly well suited for more frequent injections because they are less painful.


Needle length and comfort

The choice of needle length affects not only safety but also comfort.

Needles that are too short for intramuscular use may prevent the testosterone from reaching the muscle correctly. Needles that are too long for subcutaneous use can cause unnecessary pain.

A suitable choice can reduce:

  • Pain

  • Tissue irritation

  • Bruising

  • The risk of inflammation


Hygiene and safety

New sterile syringes and needles should be used for every injection. Reusing them increases the risk of infection and tissue irritation.

Important hygiene steps:

  • Wash or disinfect your hands thoroughly

  • Disinfect the skin at the injection site

  • Clean the vial before opening

  • Use sterile materials

  • Cover the injection site after the injection

Disposable gloves are not strictly necessary, but they provide an additional level of hygiene.


Disposal

Used needles and syringes should be disposed of in a puncture-resistant container. This helps prevent injuries and meets hygiene standards.

 

Where to store testosterone (enanthate)

Testosterone preparations should be stored correctly to maintain their effectiveness and safety.

Recommended storage conditions:

  • At room temperature, ideally between 15 and 25 degrees

  • Protected from direct sunlight

  • Do not store in the refrigerator

  • Store in a dry, dark place

  • Keep securely out of reach of children and pets

Why refrigeration is not advisable: Oily testosterone solutions can crystallize at low temperatures. This makes them harder to draw into the syringe and can make the injection more uncomfortable. In most cases, these crystals will redissolve as the preparation is slowly warmed to room temperature.

Other important tips:

  • Keep testosterone in its original packaging whenever possible

  • Regularly check the expiration date

  • Do not store opened vials for longer than necessary

  • Do not use if the solution shows visible changes

Proper storage helps maintain the quality of the medication and ensures it can be used safely.

Banner showing Adon Health's Premium Testosterone Test and inviting users to order.

Common beginner mistakes when injecting testosterone

Poor hygiene: Failing to thoroughly disinfect your hands, skin, or vial increases the risk of infection and inflammation.

Reusing needles or syringes: Single-use materials should not be reused, as dull needles and germs can cause pain and tissue damage.

Incorrect injection technique: Injecting too shallowly or too deeply can affect the medication's effectiveness and cause local irritation.

Injecting too large a volume: Injecting large volumes into one area, especially the shoulder muscle, can cause pain, pressure, and hardening.

Irregular injection intervals: Fluctuating intervals lead to unstable testosterone levels and can increase the risk of side effects.

Increasing the dose without medical supervision: Excessively high doses increase the risk of acne, water retention, and hormonal side effects.

Improper storage: Cold, heat, or light can affect the quality of the preparation.

Lack of regular medical check-ups: Without regular blood tests, potential risks such as elevated hematocrit levels may go undetected.

 

The relationship between the injection method and side effects

The type and frequency of testosterone injections affect how stable hormone levels remain in the body. Longer intervals between injections are more likely to cause significant fluctuations, which can increase the risk of certain side effects (Wang & Swerdloff, 2022).

These include:

  • Acne

  • Mood swings

  • Elevated estrogen levels

  • Water retention

Shorter injection intervals with smaller individual doses can often reduce these fluctuations, which may improve the treatment's tolerability. However, any adjustments should always be made under medical supervision and never on your own.

 

Our conclusion, your knowledge 

The testosterone injection is an effective and proven treatment for testosterone deficiency. The right injection technique, a sensible dosing strategy, and regular medical check-ups are essential for success.

Whether subcutaneous or intramuscular, weekly or every 3.5 days, the best solution depends on the individual and should always be determined together with a doctor.